Stone honeycomb panel features introduced

1. Light weight:

　　大理石复合板最薄可以只有5mm厚(与铝塑板复合)。Stone Honeycomb Panel FeaturesCommonly used composite tiles or granite, only about 12mm thick,aluminum honeycomb panelTransportation saves a lot of costs, and it is the best choice when there are load restrictions on the building.

2. Increased strength:

Marble and ceramic tiles, granite, aluminum honeycomb panels and other composite, its bending, bending, shear strength has been significantly improved, greatly reducing the transport, installation, the use of the characteristics of the stone honeycomb panel damage rate.

3, anti-pollution ability to improve:

Ordinary marble original board (full body board) in the installation process or later use process, such as with cement wet paste,double curved plateIt is very likely that after half a year or a year, there will be various discoloration and stains on the surface of the marble, which is very difficult to remove. The composite board avoids this situation because of its harder and denser bottom plate and a thin layer of glue.

4, easier to control the color difference:

Because the marble composite board is cut into 3 or 4 pieces with 1m2 of the original board (full-body board) and becomes 3m2 or 4m2. This 3, 4m2 pattern and color is almost 100% the same, so it is easier to ensure that the use of large areas, the stone honeycomb panel features its color and pattern consistency.

5. Easy installation:

Because of the above characteristics, in the installation process, regardless of the weight, the characteristics of the stone honeycomb panel is easy to break (strength, etc.) or color separation splicing greatly improves the installation efficiency and safety, but also reduces the installation cost.

6. Break through the restricted area:

The decorative parts of marble, regardless of internal and external walls, floors, window sills, porches, tabletops, etc., the ordinary original panels (full-body panels) with the characteristics of stone honeycomb panels do not have problems, except that no decoration company dares and cannot take this risk for the ceiling, whether it is marble or granite. And marble and aluminum-plastic plate, aluminum honeycomb bonding composite board will break through the stone decoration of the forbidden zone. Because it is very light, the weight is only 1/5 to 1/10 of the whole body plate. If you want to decorate the ceiling with stone, it must be.

7. Sound insulation and moisture-proof:

The composite panel made of aluminum honeycomb panel and marble has the properties of sound insulation, moisture proof, heat insulation and cold proof because of its hollow aluminum honeycomb core made of equilateral six-sided type. Therefore, these characteristics are far beyond the full body plate does not have the performance characteristics.

8. Energy saving and consumption reduction:

Stone aluminum honeycomb composite panel because of its sound insulation, moisture-proof, stone honeycomb panel characteristics of thermal insulation performance, therefore, in the indoor and outdoor installation can greatly reduce the consumption of electric energy and heat energy.

9. Reduce costs:

Because the stone composite material is thinner and lighter, the characteristics of the stone honeycomb panel save a part of the cost in transportation and installation, and for the more expensive stone varieties, the price of the finished plate is lower than that of the original plate to varying degrees.

Recommended:Colored stainless steel honeycomb panel Advantages of wood grain aluminum veneer