Characteristics and Installation of Stone Honeycomb Panel

　　随着建材工艺的不断发展，石材Honeycomb Panel的应用领域越来越广。它的各种优点，使得消费者越来越喜爱它。下面带着广大的消费者朋友们好好的了解一下这Features of stone honeycomb panelswith the installation.

1. Light weight:

The thinnest marble composite board can be only 5mm thick (composite with aluminum honeycomb board). The characteristics of stone honeycomb panels commonly used composite tiles or granite, only about 12mm thick, transportation will save a lot of costs, the building has a load limit in the case of it is the best choice.

2. Increased strength:

Marble & Tile, Granite,aluminum honeycomb panelAfter the composite, the characteristics of the stone honeycomb panel bending, bending, shear strength has been significantly improved, greatly reducing the transport, installation, use of the process of damage rate.

3, anti-pollution ability to improve:

Ordinary marble original board (full body board) in the installation process or later use process, such as with cement wet paste,double curved plateIt is very likely that after half a year or a year, various discoloration and stains will appear on the surface of the marble, and the characteristics of the stone honeycomb panel are very difficult to remove. The composite board avoids this situation because of its harder and denser bottom plate and a thin layer of glue.

4, easier to control the color difference:

Because the marble composite board is cut into 3 or 4 pieces with 1m2 of the original board (full-body board) and becomes 3m2 or 4m2. This 3, 4m2 pattern and color is almost 100% the same, so it is easier to ensure that the use of large areas, the characteristics of the stone honeycomb panel color and pattern consistency.

5. Easy installation:

Due to the above characteristics, in the installation process, regardless of weight, easy to break (strength, etc.) or color separation splicing, the installation efficiency and safety are greatly improved, and the installation cost is also reduced.

6. Break through the restricted area:

The decorative parts of marble, no matter the internal and external walls, the ground, the window sill, the porch, the desktop, etc., the ordinary original board (full-body board) has no problem, but the ceiling, whether marble or granite, the characteristics of stone honeycomb board, any decoration company dare not and cannot take this risk. And marble and aluminum-plastic plate, aluminum honeycomb bonding composite board will break through the stone decoration of the forbidden zone. Because it is very light, the weight is only 1/5 to 1/10 of the whole body plate. If you want to decorate the ceiling with stone, it must be.

7. Sound insulation and moisture-proof:

The composite panel made of aluminum honeycomb panel and marble has the properties of sound insulation, moisture proof, heat insulation and cold proof because of its hollow aluminum honeycomb core made of equilateral six-sided type. Therefore, the characteristics of the stone honeycomb panel these characteristics are far beyond the full body plate does not have the performance characteristics.

8. Energy saving and consumption reduction:

Stone aluminum honeycomb composite panels because of its sound insulation, moisture, insulation performance, therefore, the characteristics of stone honeycomb panels in indoor and outdoor installation can greatly reduce the consumption of electric energy and heat energy.

9. Reduce costs:

Because the stone composite material is thinner and lighter, it saves a part of the cost in transportation and installation. The characteristics of the stone honeycomb panel and the more expensive stone varieties, after making the composite panel, the price of the finished board is lower than that of the original board to varying degrees.

installation method of stone honeycomb panels:

1. Lifting lug type This installation method is to separate the lifting lug and the honeycomb plate. After the lifting lug is processed separately, it is connected to the glue seam position of the honeycomb plate. The suitable width of the glue seam is ≥ 12mm. This installation method makes the processing simple and the installation convenient.

2. Flip type This installation method is to process the flanging for installation when processing the aluminum honeycomb panel. The characteristic installation of the stone honeycomb panel only needs to comfort the connection with the keel and the glue seam. The suitable glue seam width is ≥ 10mm. This method is convenient to install, but the processing is slightly complicated and is not suitable for the modeling curtain wall panel.

3. Buckle type This node is aluminum buckle type, buckle is a specific profile, stone honeycomb panel has the characteristics of simple installation, but this method requires high machining accuracy of the plate, and it is not recommended to use the plate with a length of more than 3000mm. According to the width of the buckle strip, the plate is sewn with 20mm and 40mm, etc.

The above is about the characteristics of the stone honeycomb panel and the installation of the relevant introduction.

Recommended:What is the price of aluminum honeycomb panel slotted aluminum veneer