How about the application of aluminum honeycomb panels on ships?

　　Application of Aluminum Honeycomb Panels in Ships: Aluminum honeycomb panels can be used to manufacture ship interior panels such as control panels, bulkheads, ceiling panels, luggage racks, toilet units, lavatories, and floor panels due to their light weight, high strength, good rigidity, high flatness, and non-deformation advantages., Four-corner doors and isolation hatch doors, as well as external components such as roof, high-end, guard plates, the entire car body, compartment panels, etc.

The panels on both sides of the aluminum honeycomb panel are high-strength aluminum plates, and the inner layer is a special hexagonal aluminum honeycomb. As a core plate adhered to the sandwich structure, it bears pressure in the tangential direction. These mutually restrained dense honeycombs are like many small I-beams, which can disperse and bear the pressure from the panel direction, make the panel bear uniform force, and ensure that the panel can still maintain high flatness in a large area.

　　aluminum honeycomb panelThe design idea of the structure comes from the I-beam structure: the surface plate is equivalent to the wing plate of the I-beam and mainly bears the positive stress; the middle honeycomb layer is equivalent to the web plate of the I-beam and mainly bears the shear stress.

The structure of the two panels of the aluminum honeycomb panel is high and has a large sectional moment of inertia, so it has good rigidity and high bending strength. The middle sandwich layer is bionic in the natural honeycomb structure, with less materials, but with high shear strength and good stability. The optimal combination of the surface plate and the honeycomb intermediate layer makes the honeycomb panel have the advantages of light weight, high strength and good rigidity. Table board and honeycomb selection appropriate, but also to obtain good seismic, heat insulation, sound insulation and other properties.