Fabrication of aluminum honeycomb panel

used in different placesaluminum honeycomb panelIn fact, there are different specifications, such as the honeycomb aluminum plate used for curtain wall and building exterior wall specifications are not the same. The aluminum honeycomb panel used as the exterior wall of the building is generally coated with fluorocarbon resin and anodic oxide film. At present, the most widely used is still able to adapt to various weather conditions of polyvinylidene fluoride fluorocarbon resin, pure resin is not suitable for use in aluminum, must add some materials, change the coating of pure resin can be.

Generally speaking, the honeycomb core of aluminum honeycomb panel is hexagonal, and the side length is not longer than 6mm, the thickness of the filter is controlled6-0.05mm, side length not longer10mm honeycomb aluminum plate, the thickness of aluminum foil should not exceed0.07mm.

Honeycomb aluminum plate is made up of upper and lower 2Layer aluminum plate, the middle is a high-strength building material composed of aluminum honeycomb core. The panel is usually sprayed with fluorocarbon paint or polyester paint, and the honeycomb aluminum plate is mostly used for indoor and outdoor decoration and curtain wall production.

Aluminum honeycomb panel has the characteristics of high rigidity, light weight and high flatness. Because the middle layer of aluminum honeycomb panel is the air layer, its vibration reduction, sound insulation and heat insulation performance are good. Honeycomb aluminum plate is all aluminum structure, can be recycled, belongs to environmental protection and energy saving materials. Honeycomb aluminum plates have been widely used in the building materials industry, such as curtain walls, sentry boxes, building partitions, etc.

There are 1100 materials used in aluminum honeycomb core、3003The aluminum sheet is made1100、3003、5005What kind of material is used according to the purpose.

The manufacture of aluminum honeycomb panels can be divided into three types:

The first: the use of thermoplastic film, the use of flat continuous thermal composite;

The second: the use of room temperature curing polyurethane or epoxy glue, the use of hand paste or spray glue composite;

The third: the use of epoxy film, the use of hot-pressing composite;

Recommended article:

Anodic Oxidation Process of Honeycomb Aluminum Plate

/Article/fengwolvbanyangjiyan_1.html

Selection requirements for aluminum honeycomb panel

/Article/lvfengwobanxuanzeyao_1.html

Aluminum honeycomb panel stone composite panel nine advantages

/Article/lvfengwobanshicaifuh_1.html