Some knowledge of aluminum honeycomb panel

　　Some knowledge of aluminum honeycomb panel,??aluminum honeycomb panel??Suitable for civil construction, vehicle and ship decoration, etc. It is the application of aviation and aerospace materials in the field of civil construction. The whole processing process is completed in a modern factory. Hot pressing technology is adopted. Due to the high thermal conductivity value between the aluminum skin and the honeycomb, the thermal expansion and contraction of the inner and outer aluminum skin are synchronized. There are small holes in the honeycomb aluminum skin, so that the gas in the plate can flow freely. The slidable installation buckle system will not cause structural deformation during thermal expansion and contraction.

Some knowledge of aluminum honeycomb panel, aluminum honeycomb panel panel mainly uses high-quality 3003H24 alloy aluminum plate or 5052AH14 high manganese alloy aluminum plate as the base material, panel thickness is 0.8~1.5mm fluorocarbon roll-coated plate or light-resistant baking varnish, aluminum honeycomb panel light-resistant baking varnish is stronger than PVDF in scratch resistance, acid rain corrosion discoloration resistance, self-cleaning, bottom plate thickness is 0.6~1.0mm, total thickness is 25mm.

　　Some knowledge of aluminum honeycomb panels,When installing the aluminum honeycomb panel, it is installed on both sides without mechanical damage. The sliding installation buckle system allows thermal expansion and contraction, and the anti-slip buckle at the bottom of the board can control the expansion direction of the board. 25MM hidden glue joint system is beautiful and has self-cleaning function. After the completion of the production of the box-type honeycomb plate, the inner and outer plates and the honeycomb structure form a whole. In addition, the hollow honeycomb can also greatly reduce the thermal expansion of the plate body.

The use of aluminum honeycomb panel

(1) External wall hanging board of building curtain wall

(2) Interior decoration works

(3) Billboards

(4) Buildings on board

(5) Aviation Manufacturing

(6) Indoor partition and commodity display

(7) Commercial transport vehicle and container vehicle body

(8) Buses, trains, subways and rail transit vehicles

Advantage performance of aluminum honeycomb panel

(1) aluminum honeycomb panel fire: aluminum plate is a non combustible material.

(2) Corrosion resistance of aluminum honeycomb panels: The surface of aluminum honeycomb panels is treated with epoxy fluorocarbon, which has strong corrosion resistance. Salt spray for 48 hours without pinhole, crack, no bubble.

(3) aluminum honeycomb panel environmental protection: honeycomb panel belongs to pure aluminum Products, do not volatilize any harmful gas to the human body, no radioactivity and can be completely recycled, 100% environmentally friendly Products.

(4) the aluminum honeycomb panel is easy to dismantle and assemble, and will not dismantle the bad plate. Due to its light weight and convenient transportation, it can be transported to different places for repeated use. This is the other partition plate can not be compared.

Installation method of aluminum honeycomb panel

1. Aluminum honeycomb plate lifting lug type

This installation method is to separate the lifting lug and the honeycomb panel. After the lifting lug is processed separately, it is connected to the glue seam position of the honeycomb panel. The suitable width of the glue seam is ≥ 12mm. This installation method makes the processing simple and the installation convenient.

2. Aluminum honeycomb panel flanging type

　　此安装方式是加工aluminum honeycomb panel时即加工有安装用翻边,Some knowledge of aluminum honeycomb panels,The installation of aluminum honeycomb panel only needs to comfort the connection with keel and glue joint. The suitable glue joint width is ≥ 10mm. This method is convenient to install, but the processing is slightly complicated and is not suitable for modeling curtain wall panels.

3. Buckle type

　　Some knowledge of aluminum honeycomb panels,This node is aluminum buckle strip type, buckle strip is a specific profile, aluminum honeycomb panel installation is simple, but this method on the plate processing accuracy requirements are higher, not recommended for the length of more than 3000mm plate. According to the width of the buckle strip, the plate is sewn with 20mm and 40mm, etc.