What are the installation methods of aluminum honeycomb panels?

　　What are the installation methods of aluminum honeycomb panels?Here are aluminum honeycomb panel manufacturers to introduce, I hope our introduction can better help you

1. Lifting lug type: This installation method is to separate the lifting lug and the honeycomb plate. After the lifting lug is processed separately, it is connected to the glue seam position of the honeycomb plate. The suitable width of the glue seam is ≥ 12mm. This installation method makes the processing simple and the installation convenient.

　　2、翻边式：此安装方式是加工aluminum honeycomb panelWhen processing with installation flanging, installation only need to comfort the connection with keel and glue seam, the appropriate glue seam width is ≥ 10mm, this method is convenient to install, but the processing is slightly complicated, not suitable for modeling curtain wall panels.

3. Buckle type: This node is aluminum buckle type, and the buckle is a specific profile, which is simple to install. However, this method requires high processing accuracy of plates, and it is not recommended to use plates with a length greater than 3000mm. According to the width of the buckle strip, the plate is sewn with 20mm and 40mm, etc.