Precautions for the use of aluminum veneer curtain wall materials

　　Matters needing attention in the use of aluminum veneer curtain wall materials | hot information | kaimai metal building materialsIn the process of using aluminum veneer Products, if the maintenance and maintenance is unreasonable, then the aesthetics and practicality of aluminum veneer Products will have a large or small impact. So, in the daily use of the process, should be how to maintain and maintain aluminum veneer Products??

　　Matters needing attention in the use of aluminum veneer curtain wall materials | hot information | kaimai metal building materials

1. In the process of handling aluminum veneer Products, you must handle them with care to avoid accidentally bumping and causing damage to the product, which will not only affect the appearance, but also destroy the function;

2, in the storage of aluminum veneer Products, to ensure that the storage environment is well ventilated, sufficient light, indoor dry, will not be easily corroded, and must avoid aluminum veneer Products from wind and rain;

3. In the process of storing aluminum veneer Products, in addition to paying attention to the storage environment, the bottom of the product should be separated from the ground with a mat, and the distance between them should be greater than 10cm as far as possible;

4. In the process of transporting aluminum veneer Products, be sure to cover them with tarpaulin to avoid being drenched in rain and snow;

5, must not be dangerous chemicals or moisture-prone materials and aluminum veneer Products stored together;

6. After the aluminum veneer is processed into windows, doors, etc., the aluminum surface must be cleaned regularly and regularly. The cleaning method can be to clean with neutral detergent and net cloth;

7, In the process of installing aluminum veneer Products, the first thing to do is to use waterproof tape on its surface and frame material in contact with the wall. This is to ensure that the paint film and oxide film on the surface of the product will not be damaged, and the quality of the selected sand, cement, etc. must also pass, and do not use inferior Products.