The difference between aluminum honeycomb panel and aluminum facing curtain wall

Aluminum honeycomb panels and aluminum facing curtain walls are the main Products of architectural decoration, which are recognized by the market because of their good quality. However, most consumers cannot distinguish the characteristics of aluminum veneer curtain wall and aluminum honeycomb panel curtain wall.

Let\'s start with the honeycomb aluminum plate. Compared with the curtain wall aluminum plate, the honeycomb aluminum plate can reach 1500mm-4500mm. Since the honeycomb aluminum plate is a composite material, the internal aluminum honeycomb ensures that the panel itself can bear its own weight, so there is no need to add any steel bars. Ordinary curtain wall aluminum plates with a width greater than 1m or a length greater than 2m must be welded with steel bars on the back of the veneer. In addition, due to the different thermal expansion coefficients of the steel bars and the plate itself, the front surface of the plate becomes uneven six months to one year after completion after many times of alternating hot and cold.

These two technologies are also different: because the curtain wall aluminum plate is a single-layer product, the processing is relatively simple, and the modeling ability is strong. The disadvantage is poor accuracy; as a composite product, aluminum honeycomb panel ensures accuracy due to its slow processing speed and weak ability.

The difference between the two in the installation: honeycomb aluminum plate with buckle cover system, can choose to hide the glue seam and exposed glue seam two systems. Because these two systems consider the influence of thermal expansion and cold contraction, the surface can be freely expanded and contracted in four directions, which greatly reduces the influence of temperature stress on the surface flatness; the surface of ordinary single-layer aluminum plate is easy to warp, because it is the glue seam exposed system. The installation code is used to install the fixed keel, and there is no suitable space to release the temperature stress.

　　aluminum honeycomb panelFeatures: Since the aluminum honeycomb panel is a composite panel, it is light in weight, high in strength, good in flatness, large in surface, easy to install and easy to maintain. At the same time, due to its reusability, it is very environmentally friendly and can resist thermal expansion and contraction.