What specifications do aluminum honeycomb panels have?

Aluminum honeycomb panel is a new type of building home decoration materials, as the name suggests, there are many small holes on the honeycomb aluminum skin, just like the honeycomb, which is named. It is this characteristic that aluminum honeycomb panels are not prone to structural deformation when they encounter thermal expansion and contraction. Aluminum honeycomb panels are also widely used, so what are the specifications of aluminum honeycomb panels?

Aluminum honeycomb panel is suitable for vehicle decoration, furniture, civil construction, etc., is the application of aerospace materials in the field of civil construction. The panel mainly uses high-quality 3003H24 alloy aluminum plate or 5052AH14 high manganese alloy aluminum plate as the base material. The panel thickness is 0.8-1.5mm fluorocarbon roll-coated board or light-resistant baking varnish. The light-resistant baking varnish is stronger than PVDF in acid rain corrosion discoloration resistance, scratch resistance and self-cleaning properties. The thickness of the bottom plate is 0.6-1.0mm, and the total thickness is 25mm.

The core material adopts hexagonal 3003 aluminum honeycomb core, the thickness of aluminum foil is 0.04-0.06mm, and the side length is 5-6mm. The forming of the front and back skins is completed by roll forming technology, the edge is folded by full-automatic machinery and equipment, and the front and back skins are tightly occluded at the installation edge. The whole processing process is completed in a modern factory. Hot pressing technology is adopted. Due to the high thermal conductivity value between the aluminum skin and the honeycomb, the thermal expansion and contraction of the inner and outer aluminum skin are synchronized. There are small holes in the honeycomb aluminum skin, so that the gas in the plate can flow freely. The slidable installation buckle system will not cause structural deformation during thermal expansion and contraction, thus ensuring extremely high flatness.

　　aluminum honeycomb panel规格厚度一般在10-100mm,尺寸一般不超过1500*5000mm。特殊要求可定制2000*6000mm的大板面aluminum honeycomb panel。具有相同刚度的蜂窝夹层板重量仅为铝板的1/5,钢板的1/10。总厚度为15mm,面板为1.0mm,底板为0.8mm的aluminum honeycomb panel,重量只有6公斤/平方米。

The interconnected aluminum honeycomb core is like countless I-beams. The core layer is distributed and fixed in the whole plate surface, making the plate more stable. Its wind pressure resistance is much better than that of aluminum new plate and aluminum single plate, and has the characteristics of not easy deformation and good flatness, even if the cell size of the honeycomb plate is large. It can also achieve extremely high flatness and is the preferred lightweight material for the construction industry.

Compared with aluminum veneer, the larger plate surface of honeycomb aluminum plate can be 1500mm × 4500mm, because the plate itself is made of composite material, and the internal aluminum honeycomb provides guarantee for the plate itself to bear its own weight, so that the plate itself does not need to add any reinforcing ribs. However, when the width of ordinary aluminum veneer is greater than 1m or the length is greater than 2m, stiffeners must be added behind the plate.

Because aluminum honeycomb panels are applied to construction, furniture, and fields from the aerospace field, the specification range of aluminum honeycomb panels is still relatively large, which can meet different types of needs. Hope the above content can help you!