China's earliest production and processing of aluminum veneer ceiling, one of the curtain wall manufacturers
近几年,aluminum honeycomb panelAs a rising star in the aluminum plate, gradually into everyone\'s field of vision. The aluminum honeycomb panel is compounded by hot pressing molding technology. It is divided into three layers: bottom plate and panel plus honeycomb core. The aluminum honeycomb core supports the bottom panel flatly, so that the plate will not deform in the environment of alternating hot and cold.
Surface color can be optional, can be customized production, modeling is divided into flat and arc plate.
In fact, the aluminum honeycomb panel is not mysterious, that is, a layer of honeycomb core is wrapped between two layers of aluminum skin.
Aluminum Honeycomb Panel Structure-Honeycomb Core
The whole processing process of aluminum honeycomb panel is completed in a modern factory. Hot pressing technology is adopted. Due to the high thermal conductivity value between aluminum skin and honeycomb, the thermal expansion and cold contraction of inner and outer aluminum skin are synchronized. There are small holes in the honeycomb aluminum skin, and the air in the flap can flow automatically. The slidable installation buckle system will not cause structural deformation during thermal expansion and cold contraction.
Honeycomb aluminum panels are suitable for interior and exterior walls of civil buildings, airports, vehicles and ships to decorate gymnasiums, subways, schools, elevated buildings, garages, advertising signs, etc.
Honeycomb board features:
1. Honeycomb aluminum plate is easy to dismantle and assemble, and will not break the plate. Because of its light weight and convenient transportation, it can be transported to different places for reuse, which is incomparable to other plates;
2. Light weight, good rigidity, high strength, contact steel enough to ensure long-term use of flatness and wind resistance and earthquake resistance;
3. The plate has high flatness, light weight, high strength, and is not easy to deform; diverse colors, elegant and smooth, and strong decoration;
4. Honeycomb core material is helpful for space insulation, sound absorption and heat insulation, flame retardant; high quality material and advanced processing technology, durable.
Production steps
Drawing deepening, aluminum selection, customization required, single opening,
Cutting-shearing-bending-gluing-adding honeycomb core-coating-adding bottom plate-hot pressing-surface treatment-sticking film-packing, some production steps will also be different, some will choose to do surface treatment first, and then process honeycomb core composite hot pressing molding. This surface treatment is relatively easy.
Installation method
Lug type, flanging type, buckle strip type, each installation method has a unique method, lug type is simple, fast and convenient, flanging type installation is convenient, processing is suitable for flat plate is not suitable for modeling plate, buckle strip type installation belongs to high-demand building use, its precision processing requirements are high, belongs to engineering customized plate, installation method is relatively simple and practical.