Significance of punching aluminum honeycomb plate

Introduction: There are many models of aluminum honeycomb panels. According to different application requirements, many different types are reproduced. There is a common type of punching aluminum honeycomb panels. Why do you want to punch holes? What is the effect of such punching holes? Today, I will explain it to you.

Punch can increase the ornamental aluminum honeycomb panel, some people will ask: no punching hole is not beautiful, of course, there will be no punching hole aluminum honeycomb panel, but punching aluminum honeycomb panel is also a kind of beauty, is two completely different beauty, just like a kind of ingredients using different cooking methods, to make a different taste to enjoy.

2. Punching can absorb sound. The aluminum honeycomb panel has a special honeycomb structure. The sound is sucked in from the hole. It needs to walk back and forth in the honeycomb core slot. The sound will not pass through the outside world and will come out from the small hole again. At this time, the sound has disappeared. The sound insulation mystery of punched aluminum honeycomb panel.

3. Punching can absorb heat and heat preservation. In the high temperature season, punching aluminum honeycomb panel can absorb part of the heat energy and store it in the honeycomb core groove in the plate. In the cold season, the indoor temperature can be sealed and maintained at room temperature for a period of time.

4. Punching can reduce weight. Compared with our two honeycomb panels of the same specification, one is punching and the other is not punching. Punching is lighter than punching, which saves effort during installation and use.

　　aluminum honeycomb panel punchingAfter there can be heat absorption and insulation and sound insulation function, so naturally to punch, on the one hand can effectively store the heat, on the other hand can make the sound wave in the honeycomb core nest structure of multiple reflections, and can effectively absorb heat, to achieve the role of heat insulation, heat preservation. The first thing is the customer\'s request. If you say you don\'t want to punch holes, of course you can\'t punch holes casually.