Aluminum veneer gap treatment method

When aluminum veneer is installed, due to the different aluminum veneer processes, the size error or process error produced by the manufacturer, or the technical problems of the installation workers, may lead to large or small gaps after the aluminum veneer is installed, which is very unsightly. Small gaps are better handled, and glass glue is generally used, but the gaps are relatively large and difficult to handle.

The gap is not only caused by the installation of aluminum veneer, but also by the installation of aluminum strip buckle. This kind of problem may be caused by a few 0.0 errors in the size of keel and strip buckle produced by the manufacturer. Generally, such a problem will occur after shipment. What is more worry-free is to let the manual installation workers install it, and then assist the glass glue to fill it up. If it is really not possible, we must communicate with the seller.

The seam can be used by skilled construction personnel to help you minimize the gap during installation, and then assist with glass glue to wipe off the seam without revealing traces. After installation, attention should be paid to gluing. Before the glue is completely hardened, do not stain dust and scratch the aluminum veneer curtain wall. After installation, tear off the protective gummed paper on the surface of the aluminum veneer layer by layer from top to bottom, and remove the frame layer by layer synchronously. Attention should be paid to protecting the aluminum veneer when removing the frame. Do not scratch or scratch the whole curtain wall project.

Performance and application of aluminum veneer

Aluminum corrugated core composite board is a kind of metal ceiling with composite panel structure. Its panel is made of high-quality and high-strength aluminum alloy plate. The core material is rolled by automatic machinery or continuous stamping to complete the corrugated shape, and the material strength is increased. Using aviation hot sol, the plate is bonded by high temperature and high pressure. Can be punched plate, the back of the paste sound-absorbing non-woven fabric, can be used as a sound-absorbing ceiling. Its structure is mainly composed of panels, corrugations and linings, and has many advantages:

1, lightweight and safe, aluminum corrugated core composite board overall small proportion, light weight, is the same specifications of aluminum plate, 1/5, 1/10 of the steel plate, in the wide design more secure.

2, enhance the strength of the ceiling plate, aluminum corrugated core composite board high strength, high hardness, high rigidity, is the traditional aluminum plate and aluminum veneer can not match.

3, high flatness, good compressive performance, aluminum corrugated core composite board in the middle of the air layer by the panel, floor and corrugated core body is divided into a number of sealed unit room, greatly limiting the heat and sound conduction, so that the plate has better heat preservation, sound insulation performance.

4. This board is made of all aluminum, does not contain any flammable materials, has super fire resistance and flame retardancy, and has been inspected by the National Fire Building Materials Quality Supervision and Inspection Center, and the combustion performance has reached GB-8624-A1. At the same time, the plate in the humid environment will not produce mildew, corrosion and other phenomena.

5. No color difference, no discoloration, the surface of the corrugated board is treated with fluorocarbon process or pre-roller coated with fluorine, the surface of the coating has no color difference, durability does not change color, and it is exposed to the sun for more than 20 years without fading.

6. All-aluminum manufacturing non-toxic, green environmental protection corrugated board, surface, inner plate, core body, etc. are made of high-strength alloy aluminum, the material will not emit harmful gases to the human body, is a green environmental protection product, easy to recycle and reuse, is the future development direction of new building materials. In addition to corrugated board technology, panel surface materials can also be selected in various colors, textures and materials, including imitation stone, wood grain, cloth grain, solid wood veneer, etc.