What are the specifications of aluminum veneer size

Aluminum veneer is an aluminum decorative material that is cut and bent and then welded, polished and painted. Aluminum veneer can be used as curtain wall materials, but also can be used as interior materials, because of the aluminum veneer light anti-corrosion strength, easy installation, so it has been widely used in building decoration. At present, it is widely used in building curtain wall, building interior, billboard, canopy and other places. As a common building decoration material, do you know the size of aluminum veneer.

Aluminum veneer generally adopts series 1 pure aluminum series and series 3 aluminum-manganese alloy series. In some special decoration materials, series 5 aluminum-magnesium alloy series are also used. Series 1 1100 series has better performance in pure aluminum series. Series 1 1100 belong to pure aluminum series and series 3 aluminum-manganese alloy, which are mostly used as base materials for indoor and outdoor decoration aluminum plates in buildings, but series 3 1100 are pure aluminum series, it is mostly used for aluminum plates in indoor and outdoor decoration of buildings, and the hardness of the material is also high, and the toughness of the aluminum plate is also good. Aluminum veneer refers to an indoor and outdoor decorative building material formed by processing and forming an aluminum plate substrate through multiple processes and spraying plastic on the surface after painting. Its structure mainly includes panels, rear reinforcing ribs, installation and connection angle codes and other components. It is mainly used in indoor and outdoor wall decoration, glass curtain wall back plate, ceiling, beam and column, canopy, elevator wrapping, etc.

　　普通铝材厚度规格有：1.2mm1.5mm,2.0mm,2.5mm,3.0mm。3毫米?厚Aluminum veneer一平方重量约8公斤，使用时尽量避免外力冲击和硬物划伤，影响装饰效果。铝板常规尺寸为：600*600mm、600*1200mm、1000*1000mm、1000*2000mm、1200*2400mm、1200*1500mm、1500*1500mm、1500*3000mm、最大可达2000*6000mm尺寸。

It is worth noting that the width of more than 1500 is an extra-wide size, and the plate needs to be customized. The cost is relatively high and it is not recommended to use it, but it can be used within 6 meters in the length direction. As long as the plate thickness is within the tolerable range without deformation and the plate thickness is within the tolerable range without deformation, in order to ensure the flatness and safety of the aluminum veneer, the cost is relatively high. It is not recommended to use, plate thickness should try to choose the conventional size, in order to ensure the safety of aluminum veneer flat. Thickness of outdoor aluminum veneer: 2.5mm and 3.0mm are generally selected; Outdoor ground floor and skirt building: generally, the thickness is 2.0mm; Indoor wall aluminum veneer or indoor ceiling aluminum veneer: generally, the thinnest thickness is 1.2mm or 1.5mm. The aluminum veneer has different installation positions, and its thickness and size can be customized according to actual conditions. According to the scientific nature of architectural design theory and practice, judging its practicality and reflecting the value of aluminum veneer will inevitably save a lot of engineering costs.

The commonly used colors of aluminum plate are gray, white, silver, black, gray, champagne, etc. The commonly used surface treatment methods of aluminum veneer are fluorocarbon spraying, polyester spraying, powder spraying, wood grain thermal transfer printing, imitation stone thermal transfer printing, anodizing, etc. The common modeling methods of aluminum veneer are arc, punching, spherical, curved, carved, hollow, pattern, etc.

The structure of traditional aluminum veneer mainly includes panel, reinforcing rib and corner code. The corner code can be directly bent and stamped by the panel, or riveted at the small edge of the panel. Through the connection between the electric welding screw reinforcement and the board surface, the aluminum veneer forms a solid whole, enhances the strength and rigidity of the aluminum veneer, and ensures the flatness and wind resistance and earthquake resistance during long-term use. If sound insulation is required, high-efficiency sound insulation and heat insulation materials can be installed inside the aluminum plate.

　　其它Aluminum veneer specificationSize, aluminum veneer manufacturers can be customized. Since all its modeling and installation connectors are customized by aluminum veneer manufacturers, there is no need for other processing after arriving at the construction site, and the direct connection angle code lock screw is fixed on the keel, which is more convenient to install.