Aluminum veneer installation should pay attention to the link

Aluminum veneer after chromizing treatment and then fluorocarbon spraying treatment, processing into building decoration materials. Fluorocarbon paint is mainly polyvinylidene fluoride resin, and the paint spray paint is divided into three types: primer, topcoat and varnish. Fluorine-containing coatings have good corrosion resistance and weather resistance, ensuring that the aluminum veneer will not be damaged by natural disasters such as acid rain after installation. The aluminum veneer can maintain long-term non-fading, long service life, and environmental protection. It is a modern new building. Widely used materials.

When designing aluminum veneer, you need to pay attention to some details. For example, when installing glass and aluminum veneer, you must keep a certain distance to avoid the temperature change of aluminum veneer too fast and cause glass deformation or self-explosion. Avoid closing the aluminum veneer as much as possible, because it is prone to thermal deformation or even explosion during welding or spraying. If it must be used, it is also provided with a process hole for exhaust, which can also be used for hoisting. Painted aluminum veneer should be used as far as possible where it cannot be directly irradiated, because the powder will fade after encountering ultraviolet rays, and some need surface treatment to indicate the direction on the drawings.

　　Aluminum veneer因其优异的性能而越来越被人们所认可，Aluminum veneerThe application of aluminum veneer is becoming more and more extensive, and the technical requirements for aluminum veneer designers are getting higher and higher. The ever-changing aluminum veneer will bring more different surprises in the rapid development.