Kaimai, the installation process of aluminum square.

The aluminum profile is made of special aluminum through ventilation and extrusion. The hardness and straightness of the product are far higher than those of other Products. In the installation structure, the main bone of the upper layer is also used, and screws and specially-made components are connected with the hammer piece of the profile. The wind resistance is very strong, so it is also very suitable for outdoor decoration. Let\'s talk about the installation of the aluminum profile.

First, install aluminum trim corners according to the same level.

Second, according to the appropriate spacing hoisting boom and light steel keel, boom spacing is less than or equal to 1.2 meters, light steel keel spacing should be kept at 1.2 meters

The third hanger pre-installed on the triangular keel, together with the triangular keel and the light steel keel, is connected vertically according to the plate spacing, and then adjusted horizontally.

Fourth, press the two sides of the square plate into the triangular keel seam in parallel, first install and then find right angles at both ends of the horizontal direction, then pull into rows of buckling plates in straight lines step by step. After each row is buckled, it needs to be adjusted once to ensure that the plate surface is smooth and the plate seam is vertical.

Fifth, remember to wear gloves when fastening the plate. If you accidentally leave dirty marks on the plate surface, you should immediately use clean water to clean it. It is forbidden to tear off the protective film during installation.

In this way, the whole installation process is good. Today\'s aluminum square pass (U-shaped square pass, U-shaped groove) has become one of the best ceiling materials in recent years. Aluminum square pass has many advantages, with open vision, ventilation and ventilation. Its lines are bright and neat, and its levels are clear, reflecting the simple and clear modern style.

<< 如果对Aluminum veneer不够了解，立即点击咨询  >>

其实想要找到好的Aluminum veneer很简单，最重要的在于您是否有选择一个好的生产，Guangzhou Kaimai Metal Building Materials Co., Ltd是中国大陆最早生产加工Aluminum veneer天花，aluminum veneer curtain wall的企业之一，专业Production of aluminum veneer,Honeycomb Panel,瓦楞板,复合扣板,aluminum honeycomb panel等产品的生产厂家。如果您对Production of aluminum veneer有意向或对Aluminum veneer有相关的想法，请马上联系我们的客服 ! Please call:86-13074271912, guangzhou kaimai metal building materials co., ltd., indoor and outdoor aluminum veneer curtain wall decorative materials to solve the expert!