Building Exterior Wall Aluminum Honeycomb Panel GB

建筑外墙用aluminum honeycomb panel

1 Scope This standard specifies the terms and definitions, classification and marking, materials, requirements, test methods, inspection rules, signs, packaging, transportation and storage of aluminum honeycomb composite panels for exterior walls of buildings (hereinafter referred to as curtain wall panels). This standard applies to aluminum honeycomb composite panels used as building curtain wall panel materials, roofing and other uses of aluminum honeycomb composite panels can refer to this standard.

2 Normative reference documents The provisions in the following documents become the provisions of this standard through the reference of this standard. For dated references, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties who have reached agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version is applicable to this standard.

GB/T 191 Packaging, pictorial marking for storage and transportation (GB/T 191-2008,ISO 780:1997,MOD)

GB/T 1452-2005 Test Method for Plain Tenacity of Sandwich Structures (ASTM C 297-94(1999),MOD)

GB/T 1453-2005 Test method for flat compression properties of sandwich structures or cores (ASTM C 365-00,MOD)

GB/T 1455-2005 Test method for shear properties of sandwich structures or cores (ASTM C 273-00,MOD)

GB/T 1456-2005 Test method for flexural properties of sandwich structures (ASTM C 393-00,MOD)

GB/T 1457-2005 Test Method for Roller Peel Strength of Sandwich Structures (ASTM D 1781-98,MOD)

GB/T 3880.2-2006 Aluminum and Aluminum Alloy Sheet and Strip for General Industrial Use-Part 2: Mechanical Properties

GB/T 6388 Transport Packaging and Shipping Marking (GB/T 6388-1986(2004))

GB/T 6461-2002(2004) Metallic and other inorganic coatings on metallic substrates-Rating of test specimens and test pieces after corrosion tests (ISO 10289:1999,IDT)

GB/T 6739-2006 Paints and Varnishes-Determination of Film Hardness by the Pencil Method (ISO 15184:1998,IDT)

GB/T 7122-1996(2004) High-strength adhesives-Determination of peel strength-Floating roll method (ISO 4578:1990,EQV)

GB/T 7124-2008 Adhesives-Determination of Tensile Shear Strength (Rigid Material to Rigid Material)(ISO 4587:2003,IDT)

GB/T 8753.2-2005 aluminum and aluminum alloy anodic oxidation coating sealing quality evaluation method part 2: nitric acid pre-dip phosphorus chromic acid method

GB/T 10125-1997(2004) Corrosion Tests in Artificial Atmospheres-Salt Spray Tests (ISO 9227:1990,EQV)

GB/T 11942-1989(2004) Colorimetric methods for color building materials

GB/T 17748-2008 Aluminum-plastic composite panels for building curtain walls

GB 18583 Limits of Hazardous Substances in Adhesives for Interior Decoration Materials (GB 18583-2008)

GB/T 21086-2007 Curtain Wall

GB/T 23443-2009 Aluminum veneer for architectural decoration