It is impossible to judge the quality of special-shaped aluminum veneer in thickness. Are you clear about this?

Most people engaged in the special-shaped aluminum veneer industry have encountered the following situations. When customizing special-shaped aluminum veneer Products with customers, customers emphasize the need to customize thick aluminum veneer. The thicker the special-shaped aluminum veneer, the better the quality of the Products. Today, Xiaobian will communicate with everyone on the issue of the thickness of special-shaped aluminum veneer. Can you really judge the quality of aluminum veneer in terms of thickness?

The thickness of aluminum veneer is generally 1.5 mm-3.0mm, which is suitable for general special-shaped aluminum veneer, flat aluminum veneer, punched aluminum veneer, and even difficult engraving plates. The thickness of aluminum veneer should not only be selected according to the installation position, but also according to the shape and specifications of the aluminum veneer. For example, a piece of aluminum veneer, or a hollow-based engraving plate, cannot be satisfied with the thickness of 3.0mm.

According to reports, the thickness of the special-shaped aluminum veneer curtain wall depends on the thickness of the aluminum sheet and the thickness of the paint. In this industry, there are aluminum veneer curtain walls with full thickness, but the situation is rare, unless special requirements. Of course, for those who use thick aluminum veneer processing and shipment manufacturers, they will pick out the worst 15 m (micron) of your aluminum veneer to stop processing, and this is what we call the new aluminum veneer. That is to say, if you choose a thick aluminum metal and stop processing, customers will have the ability to buy at a higher price.

　　此外，Special-shaped aluminum veneerThere is also a material called recycled aluminum in the industry. Although it is difficult to distinguish it from ordinary aluminum in appearance, its purity cannot be guaranteed after repeated processing. Contains more impurities, which may also contain heavy metal elements, not only harmful to the human body, but also the hardness and strength of the regenerated aluminum can not be compared with ordinary aluminum. With special-shaped aluminum veneer for product processing, although the thickness is no problem, but still can not guarantee the quality of the product.