What is the specification of Guangzhou aluminum honeycomb panel?

　　What is the specification of Guangzhou aluminum honeycomb panel?What is the specification of Guangzhou aluminum honeycomb panel?为了更直观地理解，本文详细介绍了Guangzhou Aluminum Honeycomb Panel的相关知识、规范和标准。

Guangzhou aluminum honeycomb panel is made of upper and lower aluminum plates and middle aluminum honeycomb core material. It has high strength, good flatness, rich colors, and good durability. Widely used in various architectural decoration places, furniture, machinery and equipment, ships and other fields.

Guangzhou aluminum honeycomb panel is commonly used in the field of building pedicle wall decoration. Its detection basis is JG/T334-2012 aluminum honeycomb composite panel for exterior wall of building, which is the People\'s Republic of China the standard issued by the Ministry of housing and urban rural development, referred to as Guangzhou aluminum honeycomb panel standard. This standard is applicable to aluminum honeycomb composite panels for exterior walls and roof panels.

Guangzhou aluminum honeycomb panel standard technical requirements for material selection are as follows:

1. Aluminum: 3XXXX series, 5XXX series or other series aluminum alloys with the same or better corrosion resistance and mechanical properties should be used.

2. Coating: fluorocarbon resin with excellent weather resistance, and other materials with equivalent or better performance.

3, aluminum honeycomb core: should be hexagonal structure, side length should not be greater than 10mm. The thickness of aluminum honeycomb core aluminum foil below 6mm is less than 0,05mm, and the thickness of aluminum honeycomb core aluminum foil with 6mm-10mm is less than 0,07mm.

4. Adhesive: It should have weather resistance and toughness, must not corrode aluminum, and the restrictions on harmful substances should comply with GB18583 regulations.