Sound absorption effect of selling point of sound insulation aluminum honeycomb panel

Introduction: As today\'s very popular building decoration materials, many characteristics of aluminum honeycomb panels, sound absorption and noise reduction effect is also more critical, now the production of honeycomb panels can be suitable for sound absorption requirements, noise reduction requirements are relatively high housing construction.

At present, the sound insulation aluminum honeycomb panel has been applied to engineering construction sound absorption requirements are higher, sound insulation aluminum honeycomb panel and other sound-absorbing raw materials such as sound-absorbing paper, glass fiber cotton together with the role of combination, give full play to their respective advantages, can have a stronger sound absorption effect. A sound-absorbing board composed of aluminum perforation, honeycomb and imported sound-absorbing paper is affected by the sound-absorbing characteristics of three different raw materials. Each raw material has its own variable sound-absorbing effect. By changing the combination method and the relative density, aspect ratio and main parameters of the raw material itself, the combined effect of different levels and dozens of different characteristics can be obtained. When it is especially applicable, the sound absorption index of different frequencies should be specified according to the indoor air and sound, and the combination of different raw materials should be selected, and the installation method should be coordinated with each other to achieve different sound effects.

　　Sound insulation aluminum honeycomb panelAccording to the design scheme, the finished Products with different break rates can be produced and processed to meet the sound absorption regulations required by the design office, and various inclined planes and special shapes can also be made according to the appearance of the design scheme. Because the aluminum honeycomb panel has sufficient rigidity, the vibration stimulated in the sound field is small, only the single board 1/6 up and down, so it can greatly reduce the noise impact caused by co-seismic.