China's earliest production and processing of aluminum veneer ceiling, one of the curtain wall manufacturers
The casting production process strictly controls the specifications of the honeycomb aluminum plate. The control range of chemical composition in the ingot should be as small as possible, and the chemical composition should be uniform. In addition, the smelting process, the casting process and the homogenization process must be strictly carried out. Every link must be executed.
The anodizing temperature is strictly controlled. From the anodic oxidation film formation mechanism, the lower the temperature, the formation of the oxide film is more dense, the smaller the porosity, honeycomb aluminum plate specifications with the temperature, the more loose the oxide film, the greater the porosity, the deeper the film color. The anodic oxidation temperature is an important factor affecting the density of the oxide film, and it is also an important factor affecting the color uniformity of the oxide film.
When anodizing aluminum plate, aluminum plastic plate and honeycomb plate, it is necessary to pay attention to the uniform thickness and color of the anodic oxide film, which can be reused.
Honeycomb curved board features: sound insulation, heat insulation, fire prevention, shockproof and other outstanding functions.
In order to ensure the uniform thickness of the anodic oxide film, uniform color, and reproducibility, the chemical composition of the aluminum alloy and the production process of the anodic oxidation must be strictly controlled.
The anodic oxidation current density is strictly controlled. The color of the oxide film deepens with the increase of the current density, and the film layer becomes thicker and thinner. This is due to the increase of the current density, the increase of the hole of the honeycomb aluminum plate specification film, which is easy to color; the current density decreases, the growth rate of the film layer decreases, and the film layer is dense, so the color of the oxide film deepens with the increase of the current density.
The aluminum foil roll forming process is adopted to complete the forming of the front and back skins. There are small holes in the honeycomb aluminum skin, so that the gas in the plate can flow freely. The aluminum square can be slidably installed. The honeycomb aluminum plate, the honeycomb aluminum plate and the U-shaped aluminum square will not cause structural deformation under the condition of thermal expansion and cold contraction, thus ensuring extremely high flatness. The inner honeycomb is a special hexagonal honeycomb, which is called honeycomb aluminum plate because of its honeycomb shape .
Mirror honeycomb panel appearance straight, color diversity, color uniformity, stability.
Sound insulation, heat insulation and shockproof: as the aluminum honeycomb core in the aluminum honeycomb curtain wall panel is divided into many closed cells, which hinders the flow of air, heat and sound waves are not easy to spread, the sound source noise of 100-3200HZ can reach 20-30DB, and the thermal conductivity is only 0.0424/m.k.