Workmanship details of honeycomb aluminum plate

与铝单板比较:BoxHoneycomb aluminum plate最大板面可以做到1500mm×4500mmBecause the board itself is a composite material, the internal aluminum honeycomb provides a guarantee for the board itself to bear its own weight, so that the board itself does not need to add any reinforcing ribs. And ordinary aluminum veneer in width greater1mor length greater2mIt is necessary to add stiffeners behind the board. The stiffener needs to be welded on the back of the board, because the thermal expansion coefficient of the stiffener is different from that of the board itself. After several cold and hot changes, the front of the board will appear uneven. And this phenomenon usually starts to appear half to one year after the completion of the project.

铝单板属于单层产品，加工相对简单，造型能力强，但精度较差;Honeycomb panel is a composite product, the processing speed and ability are weak, but the accuracy is guaranteed. The box-type honeycomb aluminum plate adopts a buckle cover system, which can be selected from two systems: exposed glue seam and hidden glue seam. The system fully considers the influence of thermal expansion and cold contraction on the plate surface itself, and the four directions of the plate surface can be freely expanded and contracted, effectively avoiding the influence of temperature stress on the flatness of the plate surface.

普通单层铝板只有胶缝外露系统，且安装都是用安装码固定在龙骨上，没有合适空间释放温度应力，导致板面容易发生翘曲。Honeycomb Panel为复合型板材，具有质量轻，强度高，平整度好，板面大，安装简便，易维护，环保性好，可重复利用，抗热胀冷缩性能优异等优点。铝单板为普通非复合板材，与Honeycomb Panel相比，不具有上述优点，但相比而言，造价上3MMThick aluminum veneer is generally more25MMHoneycomb board low15～20%. Because of its own weight and molding, it is less used in architecture.4MMThick aluminum veneer, and this thickness of the cost of aluminum veneer and honeycomb panel Products differ only in.5%Left and right.

roll forming technology

In the process of making the panel and the back plate, the edge of the plate needs to be folded up. The folding machine used in the traditional process will form stress in the metal because of one-time rapid folding, and will form micro damage to the metal, affecting the service life of the metal. The rolling forming technology uses ten rollers to gradually fold the edge of the plate to a preset angle, gradually forming to ensure the release of internal stress, and the damage to the metal itself is reduced to a minimum.

continuous pre-roll coating technology

When the aluminum coil is formed, the coating color is attached to the above technology, the coating adhesion is strong, the durability is good, the color is uniform, and the Products of the same batch basically do not have any color difference.

Recommended article:

Quality Standard for Honeycomb Aluminum Plate

/Article/fengwolvbandezhilian_1.html

Aluminum honeycomb panel panel with aluminum honeycomb core

/Article/lvfengwobanmianbanyu_1.html

Aluminum honeycomb panel do partition advantage

/Article/lvfengwobanzuogeduan_1.html