Is it true that the shape of moisture-proof aluminum honeycomb panel cannot exceed 90 degrees?

In the past customer contact, we have a deep feeling for customers who buy moisture-proof aluminum honeycomb panels because of its different structure. When customers make many requests for modeling, we can only tell them that this is inappropriate. Usually at this time, the customer will have questions. Why can aluminum veneer be made into shape, but moisture-proof aluminum honeycomb panel cannot? So let us answer why not??

The honeycomb core is a well-known feature of the moisture-proof aluminum honeycomb panel structure, but the moisture-proof aluminum honeycomb panel we are talking about cannot make some special shapes, which is also related to the aluminum honeycomb core.

The aluminum honeycomb core is spliced by thin aluminum foil. It is a hexagonal honeycomb structure, but the rules between the holes are ordered. Coupled with the pressure performance of the panel and bottom plate, it can withstand pressure and has good impact resistance. If you punch holes in the surface of the plate, you can further achieve a good sound absorption effect.

Why can\'t we make all kinds of shapes, because the performance of the plate is so strong?

The aluminum foil of the aluminum honeycomb core is very thin. If it is bent, it will cause a certain degree of damage to its structure. For example, the arc cannot exceed 90 degrees, otherwise the honeycomb core will be damaged.

Aluminum honeycomb cores can only be used as composite panels. For example, an aluminum veneer can also be combined with an aluminum honeycomb core. The aluminum honeycomb core of the moisture-proof aluminum honeycomb panel cannot be customized with a special shape, otherwise there will be no flat, compressive and sound insulation properties of the aluminum honeycomb core.